Can anyone point me in the direction of a website that sells threaded hooks for turnbuckles? I need some different lengths to the ones I have (which are only threaded part way).
I need M12 x around 350mm but with around 150mm of thread.
I can only find short rods.
Thanks
M12 turnbuckle hook
Re: M12 turnbuckle hook
Tried local chandlery shop yet? lots of useful stuff there usually
- wonkywheel
- Posts: 481
- Joined: June 5th, 2017, 7:31 pm
- Location: East Northamptonshire
Re: M12 turnbuckle hook
www.lsengineers.co.uk/eyenut-30mm-12mm.htm
Why not use something like this? You can buy M12 studding 1000mm long.
That is what I used but instead of an eye nut I used an extension nut. That enabled me to put a clamp with a bolt through a hole in the camper.
"Success consists of going from failure to failure without loss of enthusiasm" .......(Winston Churchill)
2007 Ford Ranger "Thunder" 4x4
Camper aedificavit domum
2016 Ford Ranger "Wildtrack" 4x4
2007 Ford Ranger "Thunder" 4x4
Camper aedificavit domum
2016 Ford Ranger "Wildtrack" 4x4
Re: M12 turnbuckle hook
OnTow,
did you source any of these in the end, I've usually bought from a barge/narrowboat shop locally but I think I saw an online option once as well
did you source any of these in the end, I've usually bought from a barge/narrowboat shop locally but I think I saw an online option once as well