Page 2 of 2

Re: EC6L Gas Locker Question

Posted: July 20th, 2015, 7:20 pm
by cthodgson
Your version sounds better, and fairer :lol:

Re: EC6L Gas Locker Question

Posted: July 20th, 2015, 7:25 pm
by keeflester
rubberrat wrote:That would be you on the horse.. Not the fox.
That would be the unspeakable in pursuit of the uneatable.

Re: EC6L Gas Locker Question

Posted: July 21st, 2015, 7:05 pm
by Madmountainman
rubberrat wrote:Just a snug fit. Lites are taller than standard bottles so the grey plastic handles only just clear the top of the locker - put the left one in first, and move into the carrier, then the right - bottom in first - then the handles swing in just grazing the top. another mm and it wouldn't work.



Gaslow 6kg's are only 460mm tall, so should fit in. I've got an EC6 and didn't think i'd fit 2 x 6kg bottles in the locker, so i'm interested to see what you end up with. My concern would be if there's sufficient room with 2 x 6kg bottles for the associated pipework, connectors and filling system.
Please post your progress with more photo's of the finished result as this modification's high on my to do list.







I can hear the googling from here...

Re: EC6L Gas Locker Question

Posted: August 25th, 2015, 9:35 pm
by Madmountainman
Any update on this thread? Did you manage to get two 6kg gaslow's in as well as all the associated pipework and filler?