Demountable camper group

As I am now the proud owner of an EC6, i'm likely to be wanting/needing the odd spare part. Where's best to get them from and, whilst i'm asking, is there a pdf instruction manual?

Don't know on the PDF and probably too late in my instance but what spares are you thinking?

In 6 years I have only replaced a charger and then the central heating pump thing (top of heaters water tank in wardrobe is a screwtop filler with min/max level marked on it and a tiny motor with impeller to drive heated water about camper) this had failed, both bits were non-skarosser and cheap to source

It was just a general enquiry. However, my ariel has lost at least one section and can be replaced easily, but an original fitment would be best. Easy Campers are still being made new today, so i'd have thought most new spares would be ✖ compatible?

I know for sure that Nolan has an Aerial in stock.
He can order any SKarosser specific spares, but most things that may need replacing will be generic.

Nolan was saying that bits like aerial's are typically generic (VW in that case)

Bits don't generally fall off fortunately

VW? VW what, did you glean any info. Parts of mine are still in trees in three different countries.
I have a bit of long black wire now, and even that succumbed to that tree at the entrance at Barn farm and was hanging at a jaunty angle for a day before I spotted it.

What about the little running lights on the front canopy? One of mine has a small section missing from the clear lens. Not crucial, but again, nice to have.

Mot sure on the running lights, have to look into that and see what we can find out,
on the aerial Nolan was telling me and Peaky it was T25 I think, one of them anyway

Ok, I'll take a look at the Just Kampers website.
I guess those running lights are generic, maybe towsure book?

Aerial's on just campers, so thanks for that info. I've found some marker lights on ebay, but just need to measure them to see if they're the same. Talking lights, I'd like to replace the G4 halogens inside for LED warm bulbs. Any idea what wattage I should go for?