I'm wanting to upgrade the heating system in my demountable as currently it only has a catalytic gas heater. There's lots of secondhand Truma and Carver caravan heaters for sale on such places as eBay, but most of them have underfloor air intakes; just wondering if anyone has worked out a way of installing one of these in a demountable where you can't just cut a hole in the floor and fit it, maybe by fitting an air duct or something similar? Trying to avoid a noisy Propex or similar type unit.
Any ideas gratefully received
Installing Truma/Carver heater with underfloor air intake
Re: Installing Truma/Carver heater with underfloor air intak
Interested to see if you can easily make this work, obviously we don't know the layout of your campers floor don't suppose uyou have any images do you Julian?
Re: Installing Truma/Carver heater with underfloor air intak
I understand why you'd want to avoid fitting a Propex heater but they do have the advantage of being able to be fitted on their side and thus vent and intake through a side wall. That said I fitted one into our Suntrekker many years ago with the vent and intake going through the floor but just behind the back of the pickup bed. Whether or not that would be possible with a Truma or Carver depends on your camper's layout of course.
Martin
Previous demountables: Island Plastics 'Suntrekker' on P100, S.Karosser 'EC8L' on Ranger supercab, self-built pop-top on Ranger double cab
Current demountables: Rhino 'Safari' hardside on Ranger double cab
Previous demountables: Island Plastics 'Suntrekker' on P100, S.Karosser 'EC8L' on Ranger supercab, self-built pop-top on Ranger double cab
Current demountables: Rhino 'Safari' hardside on Ranger double cab
Re: Installing Truma/Carver heater with underfloor air intak
Interesting thought Martin, putting it right at the back; it might be possible! I'm 200 miles way from it at the moment, so can't take a look until next week
- derestrictor
- Posts: 2344
- Joined: November 18th, 2014, 7:21 pm
- Location: gotham Nottingham
Re: Installing Truma/Carver heater with underfloor air intak
So is the inlet to be on the underside for cosmetic reasons what would happen though (thinking it through here) if you had camper mounted on truck?